Universal Serial Bus (USB)

From HwB

Developed by Compaq, Hewlett-Packard, Intel, Lucent, Microsoft, NEC and Philips.

Contents

Pinout (Normal)

Series-A:

Usbam.png

Series-B:

Usbbm.png

Series "A" plugs are used towards the host system and series "B" plugs are used towards the USB device.

Pin Name Description
1 VBUS +5 VDC
2 D- Data -
3 D+ Data +
4 GND Ground

Pinout (Mini)

Mini-A:

  5 4 3 2 1
 ___________
|_˙ ˙ ˙ ˙ ˙_|
  \       /   (at the cable)
   \_____/

Mini-B:

  5 4 3 2 1
 ___________
| . . . . . |
 \         /   (at the cable)
 |_________|
Pin Name Description
1 VBUS +5 VDC
2 D- Data -
3 D+ Data +
4 ID
  • Mini-A: Ground
  • Mini-B: Not connected
5 GND Ground

Pinout (USB 3.0)

Connectors are backwards compatible with USB 1.1/2.0. The original 4 pins are still there. Expected transfer rate 4.7Gb/s.

Pin Name Description
1 VBUS +5 VDC
2 D- Data -
3 D+ Data +
4 GND Ground
5 USB3_RX USB 3.0 Data Receive (differential)
6 USB3_RX USB 3.0 Data Receive (differential)
7 GND Ground
8 USB3_TX USB 3.0 Data Transmit (differential)
9 USB3_TX USB 3.0 Data Transmit (differential)


Technical specs

Features

  • True Plug'n'Play.
  • Hot plug and unplug
  • Low cost
  • Easy of use
  • 127 physical devices
  • Low cost cables and connectors

Bandwidth

  • High speed: 480 Mbps speed (in USB 2.0 and above)
  • Full speed: 12 Mbps speed (requires shielded cable)
  • Low speed: 1.5 Mbps speed (non-shielded cable)

Definitions

USB Host = The computer, only one host per USB system.
USB Device = A hub or a Function.

Power usage:

Bus-powered hubs: Draw Max 100 mA at power up and 500 mA normally.
Self-powered hubs: Draw Max 100 mA, must supply 500 mA to each port.
Low power, bus-powered functions: Draw Max 100 mA.
High power, bus-powered functions: Self-powered hubs: Draw Max 100 mA, must supply 500 mA to each port.
Self-powered functions: Draw Max 100 mA.
Suspended device: Max 0.5 mA

Voltage

  • Supplied voltage by a host or a powered hub ports is between 4.75 V and 5.25 V.
  • Maximum voltage drop for bus-powered hubs is 0.35 V from it's host or hub to the hubs output port.
  • All hubs and functions must be able to send configuration data at 4.4 V, but only low-power functions need to be working at this voltage.
  • Normal operational voltage for functions is minimum 4.75 V.

Shielding

Shield should only be connected to Ground at the host. No device should connect Shield to Ground.

Cable

Shielded

  • Data: 28 AWG twisted
  • Power: 28 AWG - 20 AWG non-twisted

Non-shielded

  • Data: 28 AWG non-twisted
  • Power: 28 AWG - 20 AWG non-twisted
Power Gauge Max length
28 0.81 m
26 1.31 m
24 2.08 m
22 3.33 m
20 5.00 m

Cable colors

Pin Name Cable color Description
1 VBUS Red +5 VDC
2 D- White Data -
3 D+ Green Data +
4 GND Black Ground

Contributions

Sources

UNIQ836c54f14a11b91-keydata-00000000-QINU