Ethernet AUI to AUI
From HwB
This cable can be used to connect two network interface cards (with AUI connectors) together, without use of transcievers.
Pinout
15 PIN D-SUB MALE to network interface card 1.
15 PIN D-SUB MALE to network interface card 2.
| Name | AUI1 | AUI2 | Name |
|---|---|---|---|
| TxD A | 3 | 5 | RxD A |
| RxD A | 5 | 3 | TxD A |
| TxD B | 10 | 12 | RxD B |
| RxD B | 12 | 10 | TxD B |
And make the following jumper at each end:
| Name | Pin |
|---|---|
| Vc | 6 |
| Collision Detect B | 9 |