Paravision SX-1 External IDE

From HwB

Pinout

Paravision was formerly known as Microbotics.

Dsub37f.png

37 PIN D-SUB FEMALE at the controller.

Pin Name Description
1 /IDE-RESET Drive Reset
2 D0 Data bit 0
3 D2 Data bit 2
4 D4 Data bit 4
5 D6 Data bit 6
6 GND Ground
7 D8 Data bit 8
8 D10 Data bit 10
9 D12 Data bit 12
10 D14 Data bit 14
11 GND Ground
12 GND Ground
13 GND Ground
14 GND Ground
15 GND Ground
16 GND Ground
17 GND Ground
18 +5V 5V Power
19 +5V 5V Power
20 GND Ground
21 D1 Data bit 1
22 D3 Data bit 3
23 D5 Data bit 5
24 D7 Data bit 7
25 GND Ground
26 D9 Data bit 9
27 D11 Data bit 11
28 D13 Data bit 13
29 D15 Data bit 15
30 /IOW I/O Write
31 /IOR I/O Read
32 IDE-IRQ Interrupt Request
33 IDE-A2 Address bit 2
34 IDE-A1 Address bit 1
35 IDE-A0 Address bit 0
36 /BICS1 Chip Select 1
37 /BICS0 Chip Select 0

Contributions

Sources

Usenet posting by Mike Pinso at Paravision.